APPLICATION: HMK R55 Intensive Cleaner - A superior pH 8.5 neutral cleaner for use on all new and existing interior and exterior natural and cast stone, agglomerate, and ceramic tile, regardless of surface finish.
Especially formulated to remove grout and cement film residue, light construction dirt, soil, and strip light wax coats.
Recommended for polished and honed surfaces since it does not contain acid and will not etch finishes.
Use HMK¨ R80 for heavy wax removal.
DIRECTIONS: For initial cleaning apply full strength.
For periodic thorough cleaning dilute 1:10-1:15 with water. Let stand for 10-20 minutes, but do not let R55 dry on the surface. Scrub vigorously with a white/tan polyester pad.
Re-wet area with same solution as needed. Let stand again for a few minutes, then flood rinse with clean water and wet vac. A second application may be required for stubborn spots. Double or triple rinsing may be necessary, especially if a sealer/impregnator or a polish is to be applied.
Use HMK® Z102 Defoamer in wet-vacs to prevent foaming in scrubber tanks.
COVERAGE: Approximately 125 SqFt, 11 square meters at full strength; 1800 SqFt., 165 square meters diluted per 1 liter (34 oz.) container.
WARNING: Chemical product. Non flammable, non toxic, no fumes, mild odor. Keep out of reach of children.
TESTING:
Always test procedure first in an inconspicuous area to determine dilution rate, performance, and acting time.
DISCLAIMER:
Limitation of liability: The liability of HMK® for defective products and any claims for damages whatsoever is limited to the purchase price of the products. HMK® shall not be liable for any consequential damages. No other warranty or representation is made or implied.
Stone Floor Finishes, Stone Floor Sealers, Marble Floor Restoration
